It’s Raining Software!

860x400x01.png.pagespeed.ic.Mm4V63BeYD

Well after a long blog hiatus, I’m back and happy to report there are some exciting things happening in the land of CAD.  In the past few weeks there has been some very exciting news on the software front. First, out of left field, Autodesk suddenly announced it was going to resume development of T-Splines … Continue reading

T-Splines Webinar: Transitioning from NURBS to T-Splines

EggManIntro

Well let’s get some of the dust off this blog, it’s been far too long.  I’ve been busy with a variety of projects and distractions, unfortunately very little of which can be shared here.  I did however do a nice one hour webinar hosted by Autodesk on the very basics of T-Splines.  Especially for those … Continue reading

48″ Convair 240 – Wing Lofting

LoftedWings

  Pecking away at the Convair 240 radio control model.  This is being done for a contest on the Ezone forums, and so I really need to get moving on this thing to get it in the air by June 30th contest end date.  The wings are getting there – mostly lofted, just have to … Continue reading

T-Splines Tip – Panel Line Breaks

tsBevel_PanelLines7

I figured I would do a quick little step by step on making panel line breaks with T-Splines.  The first thing is to make sure that you have an isocurve, or isocurve loop that follows the panel line break that you want.  This sometimes can be tricky – in the case of this windshield, I … Continue reading

Virtual Plastic – Porsche 962C – Main Body Complete

WindowPanelLines3

Franky, even I’m surprised with how well this is going.  The basic  body is done, and now it’s time to sub-divide the whole thing and start adding details.  I was able to use tsBevel to create panel line breaks for the side windows, and a slight joggle for the windshield.  This really shows me that … Continue reading

Virtual Plastic – Porsche 962C – Start of Surface Modeling

Front_QuarterPanel

Continuing my little Tamiya Porsche 962C “virtual plastic” build, I spent a little time at the end of Friday working on the surface modeling.  I started (Basil this is for you!) by projecting a line onto the front fender.   Project is one of those handful of Rhino commands that works on stl meshes.  There’s not … Continue reading

Giles G-200 Progress – Intersection Fairings

3_18_12_5

Moving along nicely now with the Giles G-200.  I realized that before I put any more time into the cowling, I needed to have all the rest of the intersection fairings finished up.  Really, the most complicated part, topologically speaking, is the intersection fairings.  Since the topology of the fairings must flow into the cowl, … Continue reading

Fun with EXAscan: Porsche 962 Model Scan

Porsche 962

Lately, for no particular reason, I’ve been really digging the Porsche 956/962 Le Mans racers of the 80′s and 90′s.  Fancy that.  Me.  Into cars.  Who knew?  So, I got a Tamiya kit of the 1990 Repsol Brun 962C.  Instead of building the plastic model, I thought it would be way more fun to build … Continue reading

Issac Theatre Royal Plaster Restoration

PlasterTest5

I love this blog, I really do.  And part of the reason why I love it, is because it connects me with all sorts of people, all over the world, doing cool stuff.  I was driving down the highway one day, and my phone rang, and this guy said “Hello there, my name is Corin, … Continue reading

Finally, some Giles G-200 progress. Finite Trailing Edge Thickness Airfoils in Rhino3D

GearFairing_WheelPants2

Now that we’ve got some projects cleared off, I’ve finally had time to return back to the Giles G-200.   It’s amazing to me how when you come back to a project after working on some truly difficult stuff, suddenly the things that were so hard on that earlier project are now much easier.  Such … Continue reading

Follow

Get every new post delivered to your Inbox.

Join 310 other followers